បង្ហាញកំណត់ត្រាសាមញ្ញសម្រាប់ធាតុ

Share 
 
dc.contributor.authorWiryanti, Josephine
dc.contributor.authorGlynn, George F.
dc.contributor.authorLimpus, Leonard G.
dc.date.accessioned2019-08-14T08:47:50Z
dc.date.available2019-08-14T08:47:50Z
dc.date.issued1997
dc.identifier.citationWiryanti, J., Glynn, G. F., & Limpus, L. G. (1997). An integrated quality management program (IQMP) for the on-board handling and processing of tuna. In Improved Quality Control for the Handling and Processing of Fresh and Frozen Tuna at Sea and on Shore (pp. 29-62). Singapore: Marine Fisheries Research Department, Southeast Asian Fisheries Development Center.en
dc.identifier.isbn9810090633
dc.identifier.urihttp://hdl.handle.net/20.500.12066/5347
dc.description.tableofcontents
  • 2.1 Introduction
  • 2.2 Establishment of Control Points or Inspection Points
    • 2.2.1 Process Flowchart for Inspection or Control Points
    • 2.2.2 Potential Critical Control Points
    • 2.2.3 Identification of Control Points
  • 2.3 Fish
    • 2.3.1 Requirements
    • 2.3.2 Defect Deficiency
    • 2.3.3 Monitoring Procedures
    • 2.3.4 Corrective Action
    • 2.3.5 Inspection of Tuna as it is Being Taken On-board
    • 2.3.6 Corrective Action Report
    • 2.3.7 Inspection of Tuna as it is Being Received On-board Vessel
    • 2.3.8 Information to be Supplied by Fishing Vessel
  • 2.4 Ice
    • 2.4.1 Requirements
    • 2.4.2 Ingredients
    • 2.4.3 Defect Definitions
    • 2.4.4 Monitoring
  • 2.5 Cleaning Agents, Sanitisers, Lubricants
    • 2.5.1 Requirements
    • 2.5.2 Specifications
    • 2.5.3 Monitoring Procedures
    • 2.5.4 Forms for Data Collection and Reporting
    • 2.5.5 Guidelines for Corrective Action
    • 2.5.6 Incoming Chemical Inspection Report
    • 2.5.7 Information to be Supplied by the Fishing Vessel Owner/Operator
  • 2.6 Vessel Design, Production Facilities
    • 2.6.1 Requirements for Vessel Design
    • 2.6.2 Production Facilities
    • 2.6.3 Corrective Action
    • 2.6.4 Guidelines for Corrective Action
  • 2.7 Operation & Sanitation
    • 2.7.1 Requirements
    • 2.7.2 Inspection of Vessel
    • 2.7.3 Forms for Inspection
    • 2.7.4 Guidelines for Corrective Action
    • 2.7.5 Action Reports
  • 2.8 Process Control
    • 2.8.1 Requirements
    • 2.8.2 Defects and Deficiencies
    • 2.8.3 Inspection Requirements
    • 2.8.4 Forms for Collection Data
    • 2.8.5 Corrective Action
  • 2.9 Fresh Storage Facilities
    • 2.9.1 Requirements
    • 2.9.2 Inspection Requirements
    • 2.9.3 Corrective Action
    • 2.9.4 Fresh Tuna Temperature Recovering Log
  • 2.10 Frozen Storage Facilities
    • 2.10.1 Requirements
    • 2.10.2 Inspection
    • 2.10.3 Corrective Action
    • 2.10.4 Frozen tuna Cold Storage Log
  • 2.11 Final Product
    • 2.11.1 Requirements
    • 2.11.2 Defect Tolerance
    • 2.11.3 Sampling Plan
    • 2.11.4 Corrective Action
  • 2.12 Recall Procedures
    • 2.12.1 Requirements
    • 2.12.2 Monitoring Procedures
    • 2.12.3 Guidelines for Corrective Action
    • 2.12.4 Shipping Record Report for Fresh/Frozen Tuna from Fishing Vessels
  • 2.13 Employee Qualifications on Fishing Vessels
    • 2.13.1 Requirements
  • Annex 4 Definitions
  • Annex 5 Potential Critical Control Points for the On-Board Handling of Fresh and Frozen Tuna
en
dc.language.isoenen
dc.publisherMarine Fisheries Research Department, Southeast Asian Fisheries Development Centeren
dc.titleAn integrated quality management program (IQMP) for the on-board handling and processing of tuna
dc.typeBook sectionen
dc.citation.spage28
dc.citation.epage62
dc.citation.bookTitleImproved Quality Control for the Handling and Processing of Fresh and Frozen Tuna at Sea and on Shoreen


ឯកសារសម្រាប់ធាតុនេះ។

Thumbnail

ធាតុនេះជាកម្មសិទ្ធិរបស់បណ្តុំខាងក្រោម

បង្ហាញកំណត់ត្រាសាមញ្ញសម្រាប់ធាតុ